Inertially Significant Humanoid Teleoperation via Whole Body Model Predictive Control and Online Parameter Estimation

Engineering notes

Engineering notes will be added by the Robot Papers editorial team.

Chinese explanation / 中文解读

中文解读待补充：本站会优先为 VLA、具身智能、人形机器人控制、机器人操作等高价值论文补充中文说明。

Original abstract

The effective deployment of humanoid robots in practical tasks of interest will require a capability of sensing and adapting to variations in inertial parameters, as occurs during heavy tool use or when carrying significant payload. Such payloads constitute a significant proportion of the combined payload-robot system, the effects of which cannot be ignored by delegating to feedback control. This paper showcases a general solution to this problem by integrating a whole body model predictive controller (WB-MPC) with an extended Kalman filter (EKF) for online estimation of fully physically consistent time-varying inertial parameters. These estimates are fed through to the WB-MPC's full rigid body dynamics model, resulting in more accurate feedforward torques for task demands under external load. Additionally, a virtual reality (VR) interface is provided that enables an operator to provide task-specific references without regard to payload while delegating dynamic balance to the WB-MPC. The framework is validated with simulation and hardware experiments on a humanoid system.

Links and sources

• Official / arXiv page
• PDF from original source

Comments